User Guide

8081

N/B Maintenance

5. To remove the inverter board on the lower part of the LCD housing , disconnect two cables. (Figure 2-30)

Reassembly

1. Reconnect the cables. Fit the inverter board back into place and secure with two screws.

2. Replace the LCD cover and secure with two screws and rubber pads.

3. Replace the LCD assembly. (Refer to section 2.2.8 reassembly)

4. Replace the CD/DVD-ROM drive, hard disk drive, keyboard and battery pack. (Refer to sections 2.2.5, 2.2.4, 2.2.2

and 2.2.1 reassembly)

Figure 2-30 Remove the inverter board