User Guide

8081

N/B Maintenance

1. Attach the LCD assembly to the base unit and secure with four screws.

2. Rip the antenna wires back into Min-PCI compartment.

3. Reconnect the two cables to the system board. Screw the hinge covers by two screws.

5. Replace the top cover and secure with three screws. And reconnect the touch pad’s cable.

6. Replace the rear cover.

7. Upside down the notebook. secure the top cover by seventeen screws.

8. Reconnect the antennae. And Secure the Mini PCI compartment cover by two screws.

9. Replace the CD/DVD-ROM, hard disk drive, keyboard and battery pack. (Refer to sections 2.2.5, 2.2.4, 2.2.2 and

2.2.1 reassembly)

Reassembly