User Guide

8081
8081
N/B Maintenance
N/B Maintenance
49
Figure 2-8 Remove the fan’s
power cord
Reassembly
1. Carefully, align the arrowhead corner of the CPU with the beveled corner of the socket, then insert CPU pins into
the holes. Tighten the screw by a flat screwdriver to locking the CPU.
2. Connect the fan’s power cord to the system board, fit the heatsink upon the CPU and secure with four spring screws.
3. Replace the battery pack. (Refer to section 2.2.1 reassembly)
4. Disconnect the fan’s power cord from system board. (Figure 2-8)
5. To remove the existing CPU, Loosen the screw by a flat screwdriver,upraise the CPU socket to unlock the CPU.
(Figure 2-9)
Figure 2-9 Remove the CPU