User Guide

8081
8081
N/B Maintenance
N/B Maintenance
47
Reassembly
1. Reconnect the keyboard cable and fit the keyboard back.
2. Replace the keyboard into place with three screws.
3. Replace the keyboard cover into place with one screw.
4. Replace the battery pack. (Refer to section 2.2.1 reassembly)
5. Remove three screws that secure the keyboard cover. (Figure 2-4)
6. Slightly lift up the keyboard and disconnect the cable from the system board to detach the keyboard. (Figure 2-5)
Figure 2-4 Remove three screws Figure 2-5 Disconnect the cable