Service manual

Copystar Focus Volume 8 Number 1
Page 15
RC-2000d Software Updated (continued)
MAIN
IC ROM
RC-2000d
ENGINE
IC ROM
RC-2000d
Software Update Effected
Serial #
7H
2AB27057
(N/A)
Ver.1.06
1. The detection of error code C-60 will be changed so it triggers at
preset intervals based on the amount of time it takes to reach a
preset temperature for primary stabilization and secondary
stabilization.
37003973
8J
2AB27058
(A671)
Ver.1.07
1. The detection of error code C-60 will be changed so it triggers at
preset intervals based on the amount of time it takes to reach a
preset temperature for primary stabilization and secondary
stabilization.
2. The timing of the machine paper feed motor has been changed to
prevent a blurred image from occurring (approx. 157mm) from the
trailing edge of the copy during the SRDF-1 scanning operation.
37004173
RC-2000d IC ROM Information
Old P/N New P/N Description C/S Qty.
Old/New
Price
2AB68053 2AB68054 Main IC ROM N/A 1/1 $
2AB27058 2AB27059 Engine IC ROM A671 1/1 $
RC-2000d
Change to the Motor Drive PCB
he connector CN-12 on the Drive Motor PCB is not currently used. The PCB will be changed eliminating CN-
12 from the Drive Motor PCB. There will be one extra 2 pin connector when the new Drive Motor PCB is
installed with an old Main Wire Ass’y.
Parts Information
Old P/N New P/N Description Qty.
Old/New
Interchangeability Price
2AB93071 2AB93072 Motor Drive PCB 1/1 Y/Y $
2AB27562 2AB27563 Main Wire 1/1 Y/Y $
T
CN-12
(Eliminated)