User`s manual

7
Windows NT 4.0 LPR
TCP/IP Required Components
The following steps describe how to check for and, if necessary, add the Windows TCP/IP components
which are necessary for LPR Printing.
1. Check under Start, Settings, Control Panel, Network, Protocols. If TCP/IP Protocol is not in
the list of Network Protocols, click on Add to install it.
2. Select the Services tab. If either Microsoft TCP/IP Printing or Simple TCP/IP Services is not in
the list of Network Services, click on Add to install them.
3. Click on OK when all protocols and services have been added. If the TCP/IP protocol has just
been added, Windows will prompt for the IP address and other TCP/IP parameters. The new
protocols and services will not be available until the system is restarted.
Configure the IB-2x IP Address
See the IP Address Configuration section later in this guide.
Install the Printer Driver and Configure the Port
1. Insert the Kyocera Mita Digital Library CD-ROM included with the printer and select Drivers from
the Main Menu.
2. On the Printer Connection dialog, select Local.
3. On the Select a Printer Port dialog, click on the Add LPR Port button.
4. In the Name or address of server providing lpd: field, enter the IB-2x IP address.
5. In the Name of printer or print queue on that server: field, enter any desired port name, e.g.
LPR1, and click on OK.
6. If the printer is to be shared, then on the appropriate wizard dialog select Shared and enter the
desired share name. Select any other Windows versions which you would like to automatically
receive the driver when connecting to this share.
Windows 2000 Standard TCP/IP Printing
Configure the IB-2x IP Address
See the IP Address Configuration section later in this guide.
Install the Printer Driver and Configure the Port
1. Run the Windows Add Printer wizard (Start, Settings, Printers, Add Printer).
2. Select Local Printer and uncheck Automatically detect and install my Plug and Play printer.
3. Select Create a new port and choose Standard TCP/IP port from the drop down Type list. This
will launch the Add Standard TCP/IP Printer Port wizard.
4. In the Printer Name or IP Address field, enter the IB-2x IP address.
5. In the Port Name field, enter the desired port name or accept the default.
6. After completion of the Add Standard TCP/IP Printer Port wizard, the Add Printer wizard will
continue. Select the appropriate printer model.
7. After assigning the printer a name, the Printer Sharing dialog is displayed. If the printer is to be
shared, select Share As and enter the share name. (Printer Sharing will only be available if the