User`s manual
4
Fig. 1 Quick Setup Printer Selection
NetWare Printing
There are a number of printing options in NetWare. The following gives an explanation of the various
printing methods for each NetWare version and describes how to set up printing for each method.
NetWare 3.x
NetWare 3.x supports only Bindery based printing. Two modes are supported; 1) Print Server mode
and 2) Remote Printer mode.
Print Server mode (recommended): The IB-2x acts as the Print Server and polls the print queue
looking for jobs to service. This mode uses a NetWare logon slot (i.e. 1 user license).
Remote Printer mode: The IB-2x acts as a Remote Printer accepting jobs from a Print Server running
on a dedicated workstation or on the file server. This mode does not require a NetWare user license.
NetWare 3.x Bindery
1. Run the Quick Setup wizard on the IB-2x CD-ROM.
2. In the NetWare section choose Bindery Setup. All required NetWare objects are created by the
Quick Setup wizard.
3. After running the wizard, wait a couple minutes then use the printer front panel to print the status
pages. Check the IB-2x status page for the NetWare connection information and verify that the
queue status is Ready.
4. Setup the Windows clients to print to the associated NetWare queue (see the Windows Printing
via NetWare section).