User`s manual

FCC Notice:

This equipment complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trademarks

KYOCERA

, KYOCERA MITA

are registered trademarks of Kyocera Corporation. NetWare

is a registered trademark of Novell, Incorporated.

Windows

is a registered trademark of Microsoft Corporation. Macintosh

is a registered trademark of Apple Computer, Incorporated.

PostScript

and Acrobat

are registered trademarks of Adobe Systems, Incorporated. All other products referenced are trademarks or registered

trademarks of their respective companies.

Introduction

Thank you for choosing the high quality Kyocera Mita network printing products. We are sure you will

appreciate the exceptional performance and low cost of ownership that are the hallmarks of Kyocera/

Kyocera Mita products.

This product is a Kyocera/ Kyocera Mita internal network interface card which may be easily installed

without removing the printer mainboard. This product enables Kyocera/ Kyocera Mita printers and

digital copiers to communicate over an Ethernet network with many different network operating

systems, including Windows, NetWare, Macintosh, and UNIX.

This Quick Configuration Guide provides concise software configuration instructions allowing an

experienced system administrator to get the IB-2x up and running quickly. For more complete

instructions for configuration options not covered in this guide, refer to the IB-2x User’s Manual on the

CD-ROM.

CD-ROM Contents / Using the CD-ROM

Inserting the CD-ROM causes the Main Menu to be displayed. If the Main Menu is not shown

automatically, run the Autorun.exe file in the root directory of the CD-ROM. This Quick Configuration

Guide refers to the following utilities in the Configuration section of the CD-ROM:

Quick Setup Wizard: A wizard interface for configuring the necessary settings to get the IB-2x up and

printing quickly.

Advanced Setup: Installs and runs the AdminManager program for advanced IB-2x configuration and

printer monitoring.

KPrint: Installs a client port monitor for Windows 95/98 that enables TCP/IP printing via LPR or IPP to

any IB-2x connected Kyocera/ Kyocera Mita printer.

In addition to the above utilities, the IB-2x CD-ROM includes the User’s Manual in HTML format for

viewing with a browser and the Quick Configuration Guide (this guide) in .PDF format (requires

Adobe Acrobat Reader 3.0 or later). The Acrobat Reader may be installed from the CD-ROM by

running Setup.exe in the appropriate language folder under the Acrobat folder.