SDS

SAFETY DATA SHEET
BL0925 MST BOLEX 12QT CS
Version 1.0
Revision Date 06/16/2015
Print Date 12/08/2016
4 / 10
If the product contaminates rivers and lakes or drains inform
respective authorities.
Methods and materials for
containment and cleaning up
:
Soak up with inert absorbent material (e.g. sand, silica gel,
acid binder, universal binder, sawdust).
Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
Avoid exposure - obtain special instructions before use.
Avoid contact with skin and eyes.
For personal protection see section 8.
Smoking, eating and drinking should be prohibited in the
application area.
Provide sufficient air exchange and/or exhaust in work rooms.
To avoid spills during handling keep bottle on a metal tray.
Dispose of rinse water in accordance with local and national
regulations.
Conditions for safe storage
:
Keep container tightly closed in a dry and well-ventilated
place.
Observe label precautions.
Electrical installations / working materials must comply with
the technological safety standards.
Materials to avoid
:
Store and keep away from, reducing agents, bases and
alkalies.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components
CAS-No.
Value type
(Form of
exposure)
Control
parameters /
Permissible
concentration
Basis
HYDROCHLORIC ACID
7647-01-0
C
2 ppm
ACGIH
C
5 ppm
7 mg/m3
NIOSH REL
C
5 ppm
7 mg/m3
OSHA Z-1
C
5 ppm
7 mg/m3
OSHA P0
Personal protective equipment
Respiratory protection
:
Use respiratory protection unless adequate local exhaust
ventilation is provided or exposure assessment demonstrates
that exposures are within recommended exposure guidelines.
Hand protection
Remarks
:
The suitability for a specific workplace should be discussed
with the producers of the protective gloves.