Installation Instructions

Mistral Confidential
This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance,
the following conditions must be strictly followed when using this certified module:
The module is tested for standalone portable RF exposure use condition. Any other usage
conditions such as co-location with other transmitter(s) will need a separate reassessment
through a class II permissive change application or new certification.
RF exposure considerations
This equipment complies with FCC portable radiation exposure limits set forth for an
uncontrolled environment. SAR evaluation is found to confirm compliance with relevant FCC
portable RF exposure rules set forth for body.
Antennas
The following antennas have been certified for use with this module; antennas of the same type
with equal or lower gain may also be used with this module.
Antenna Type SMD Chip type Antenna
Antenna connector MHF4
Antenna PN# SR42W001 Antenova
Antenna Gain 2dBi for 2.4GHz & 3dBi for 5GHz
e-labelling of FCC & IC
e-labelling of the regulatory information of the product can be accessed through the below path
Settings -> About tablet -> Regulatory
End-user product manufacturers shall retain and display the regulatory information in the specified
path.