Assembly Instruction

Installation

Step 1

Unpack all parts from cartons carefully.

Connect the Socket Assembly(H) to the Shade(K) by engaging

the top Tube(I) into the Socket Assembly(H) and bottom tube

through the washer of the Shade(K).Fix the Shade(K) in place

by turning the Finial(L) clockwise till tight.

Hook the top Socket Assembly(H) and Shade(K) with

Roped Hook(J) as diagram.

Step 2

Screw the Chain(G) to the Hanging Loop(D) and the loop of the

Socket Assembly(H) with Closable link/cap (G1) as diagram.

Weave the 2 wire power cord and bare ground wire through every

other loop to the top of chain(G),Hanging Loop(D),Canopy(E) and

Mounting Plate(B) as diagram.

Slide the Canopy Nut(F) then Canopy(E) to the end of the Chain(G).

Step 3 Wire connection

Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to:

Black White

*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)

Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

2 / 3