ASSEMBLY INSTRUCTIONS Description : SUPER KITCHEN ISLAND Printed in Vietnam -1-
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Bolt (M6x50mm) 2 Spring washer (ɸ6.5x11mm) Sketch NO Description Qty 8 6 Pan head screw (M4x30mm) 2 8 7 Long screw (M4x25mm) 3 3 Flat washer (ɸ6.
STEP 2 Attach legs (B) to the top (A) with bolts (1),and washers (2), (3) as shown bellow. Tighten with Allen key (5). STEP 3 Insert pins (9) into legs (B). Place the shelves (C) on the pins (9) and attach with screws (10) as shown below. Tighten with a screwdriver.
STEP 4 Attach knob (8) to front of drawers with Pan head screw (6) as shown below. Tighten with a screwdriver.
