Specifications

TROUBLE SHOOTING Cyrus DAD7

English

If you suspect that your Cyrus DAD7 is not operating to

specification, please read through this section before

returning the DAD7 to your local dealer.

A function has been selected which is not available.

An incorrect key sequence has been used during

programming.

• Check that the disc is loaded label side upward.

• The disc may be dirty or badly scratched. Try loading

another disc. If the disc is dirty or greasy, refer to the

Disc Maintenance section on page 15 for details of

disc cleaning.

• Pause may have been set. Check for the pause

symbol on the display. Press the pause key again on

the front panel or handset to cancel pause.

• If used with a Dacmaster, check if the phase light is

on when playing music, indicating signal lock. If the

light is on then the DAD7 is functioning correctly

and the problem is elsewhere in the system. If the

light is off, then check that the correct input is

selected on the Dacmaster and that the connections

between the two units are correctly and securely

made.

• If used with another D/A converter, check the

connection from the 'SPDIF' socket of the DAD7 to

the D/A converter. Check also that power is applied

to the D/A converter and amplifier and that the input

selection and volume control of these units is

correctly set.

No display

• The display may have been switched off at the

handset. Press the display key again to restore the

display and backlight.

TROUBLE SHOOTING GUIDE

Indication 'EO' on the display (Error; Operating)

Indication 'EP' on the display (Error; Programming)

Repeated Indication 'Ed' on the display when a disc is

loaded (Error; Disc)

Disc spinning with no sound

Downloaded From Disc-Player.com Cyrus Manuals