Specifications

Cyrus DAD7 REMOTE CONTROL UNIT
13
English
Whilst the front panel control keys of the DAD7 give
adequate control over the player functions, using the
remote control handset will provide access to a number of
additional features of the DAD7.
Power
Your Cyrus DAD7 can be switched to and from Standby
using the STANDBY key
1
on the handset.
All front panel controls of the DAD7 are duplicated on the
remote control handset. These control functions have been
fully covered in the operation section.
A NUMERIC KEYPAD for instant track selection is
available on the handset. Pressing any key will
immediately prompt the DAD7 to play the chosen track.
For a disc which has more than 10 tracks, the DAD7 will
briefly wait for entry of a second digit when appropriate.
Note that when a program memory is stored, the keypad
will only enable access to tracks included in the program
memory.
To store a program from the handset, follow the sequence
described on page 11 for storage from the front panel. To
select tracks for programming, use only the NEXT and
PREVIOUS keys as the NUMERIC KEYPAD is reserved
for fast access direct play only.
The DISPLAY key
2
on the handset can be used to
switch the display of the DAD7 off should this be
preferred. Pressing this key again restores the display to
its normal mode. Switching the display off stops the
digital traffic related to display update function and
reduces the load on the power supply. This can improve
the overall quality of the sound without adversely
affecting the normal functions of your DAD7.
REMOTE OPERATION
Function Controls
Direct Access Numeric Keypad
Programming from the Handset
Display Control
Downloaded From Disc-Player.com Cyrus Manuals