Specifications

OPERATION Cyrus DAD7
English
10
When the PAUSE key
8
is operated, the player will
continue to track the disc, holding at the precise point of
interruption. The PAUSE symbol will then show on the
display. A second press of the key will resume playing the
disc.
The PAUSE key can also be used to cue a track by
pressing the PAUSE key first and using the NEXT
6
and
PREVIOUS
7
keys to select the track to cue. The player
will now hold at the beginning of this track. To begin
playing this track, press the PAUSE key.
The FAST FORWARD
10
and FAST REWIND
11
keys
can be used to quickly locate a specific point within a
track.
The elapsed time of the current track is always shown on
the display during fast search to enable easy location of a
specific track time.
The Fast Search keys will also search through next or
previous tracks if held down long enough.
The REPEAT key
5
can be used for replay of the entire
disc or programmed tracks.
When REPEAT is selected, its symbol will show on the
display. Repeat can be cleared by pressing the key a
second time.
If a program selection has been stored, the REPEAT key
will allow continuous play of this program sequence.
The STOP / OPEN key
3
has several uses. When a disc
is playing, use of this key will stop the disc immediately.
Continued depression of the key when the disc has
stopped spinning will raise the dust cover for a few
seconds to give access for lifting.
If the disc is already stationary, a touch of the STOP /
OPEN key will raise the dust cover immediately. Opening
the cover will also clear the program memory.
PAUSE
FAST SEARCH
REPEAT
STOP / OPEN
Downloaded From Disc-Player.com Cyrus Manuals