Operator`s manual

Badger II Power Supply Operator’s Manual
Remote Sense Connections
Sense Connections on single (Maxi Module) output cards:
 The Badger II is shipped with Local Sense installed.
 If Remote Sense is desired, remove jumpers JMP1 and JMP2,
located behind the sense connector. (See Fig. 4)
 Connector pin J3-1 is the +Sense and J3-3 is the –Sense. (See
Fig. 6)
 Use Molex mating receptacle P/N 50-57-9403 with P/N 16-02-
0103 terminals.
 Attach terminals to 22-24 AWG stranded twisted pair wire.
 Attach opposite end of sense lines to point where regulation is
desired.
Sense Connections on dual (Mini Module) output cards:
 The Badger II is shipped with Local Sense installed.
 If Remote Sense is desired, remove jumpers on JMP1 and JMP2
for output #1 (lower connector) and jumpers on JMP3 and JMP4
for output #2 (upper connector). (See Fig. 5)
 Connector pin J3-3 is the +Sense and J3-5 is the –Sense for out-
put 1. J4-3 is the +Sense and J4-5 is the –Sense for output 2.
(See Fig. 7)
 Use ITT/Cannon mating receptacle P/N DAM7W2PK87.
Remote Sense Connections are not available on quad (Micro
Module) output cards.
Trim Connections
Trim Connections on single (Maxi) output cards:
 J3-2 provides Trim access. (See Fig. 6)
 Use Molex mating receptacle P/N 50-57-9403 with P/N 16-02-0103 ter-
minals.
 Attach 22-24 AWG stranded wire using Molex tool P/N 11-01-0118.
Trim Connections on dual (Mini ) output cards:
 J3-4 provides Trim access for output 1 (lower connec-
tor), and J4-4 provides Trim access for output 2 (upper
connector). (See Fig. 7)
 Attach 22-24 AWG stranded wire.
J3
Remove Jumpers for
Remote Sense
Output 1
Remove Jumpers for
Remote Sense
Output 2
J3
Remove
Jumpers
for
Remote
Sense
Trim Connections are not available on quad (Micro) output
cards.
Rev. 05/11/2012 Mission Power Solutions [phone] [e-mail] Pg. 3
Figure 4. Single (Maxi Module) Remote
Sense Jumpers
Figure 5. Dual (Mini Module) Remote
Sense Jumpers
Figure 6. Single (Maxi Module)
Trim Connections
Figure 7. Dual (Mini Module) Trim
Connections
Pin
1 N/C
2 N/C
3 +Sense
4 Trim
5 –Sense
J3/J4
J3
3 2 1
Pin
1 +Sense
2 Trim
3 –Sense