Installation Manual

02 | iNsTalliNG THe misHimOTO FaN sHrOUD
1. Install the Mishimoto fan shroud onto the radiator. It is secured to
the radiator by three 10mm bolts on the top, and three 12mm nuts
and bolts on the bottom.
2. Reinstall the coolant reservoir tank, which is secured to the fan
shroud with two 10mm bolts. Then reconnect the coolant feed hose
to the reservoir.
3. Reconnect the upper radiator hose to the radiator.
4. Reconnect the electrical harnesses for the fans.
(Note: For 2001-2003 vehicles, you will need to purchase two plug
adapters (P/N 45128FE000) from your dealership.)
5. Refill the coolant system with a 50/50 mixture of coolant and
distilled water.
6. Start the vehicle, set the heat to high, and check for leaks and
power to the fan.
7. Reinstall the lower splash shield.
8. You have now successfully installed your new Mishimoto
Plug-N-Play Fan Shroud. Enjoy!
02
2001-2007 sUBarU WrX aND sTi
misHimOTO FaN sHrOUD
INSTALLATION GUIDE
MISHIMOTO 18 BOulden CIrCle, new CaSTle, de 19720 P 1.877.GOMISHI www.MISHIMOTO.COM