Installation Sheet

On the wall selected for installation of the fixed
panel, check the fit of SC925 Threshold U -
Channel [4] where the threshold and wall meet. In
many cases the corner will need to be contoured to fit a
radius.
Contour the corner as required to ensure proper contact
with the wall and threshold.
Proper fit in this area allows the door to be installed
on a fiberglass enclosure.
18
NO!
NO!
YES!
YES!
Drill three (3) 3/16” diameter holes along the
centerline of the SC925 Threshold U -
Channel [4] .
Place 1 hole in the center and 1 hole 4” from
each end.
19
4”
Wall hidden
for clarity
PAGE 16