Specification Sheet

NOTE: GLAZING MATERIAL FOR ALL KD UNITS AND GLAZED UNITS MUST CONFORM TO
ANSI Z97.1 AND CPSC STANDARD 16 CFC 1201 CATEGORY 1 & 2
NOTES:
1. Towel bar assemblies are
available in 13”, 15”, 16 1/2”,
19”, 21”, 22”, and 24”
2. Towel bar sizes are measured
from center to center of the
mounting holes
3. Miseno will automatically choose
the appropriate towel bar on
complete units
4. For KD units, leave a minimum
of 1.5” between hole centers
and edges of glass
Top Roller Semi-Frameless 1/4” or 3/8” Bypass Slider
GLASS DETAIL DRAWING
1.855.480.2915 • [e-mail]