Installation Sheet

PAGE 26
SNAP ANTI-JUMP VINYL ONTO
LIP OF HEADER AS SHOWN
Step 33
Push the inner panel to one (1)
wall.
Slide one (1) piece of anti-jump
vinyl behind the inner panel.
Near the other wall, begin snap-
ping the anti-jump vinyl onto the
header. For best results, leave
1/4” between the end of the
header and the anti-jump vinyl.
Continue snapping the vinyl onto
the header towards the center of
the unit.
Step 34
Repeat for the other anti-jump vinyl piece.
Push the inner panel to the other wall.
Slide the anti-jump vinyl behind the inner panel, meeting the already installed piece in the middle.
Beginning in the middle of the unit snap the anti-jump vinyl onto the header, ending with a gap at the
wall.