Installation Sheet

Side View

Step 25

To prevent scratching the header during glass installation, apply masking tape to the

front face of the header.

PAGE 23

Step 26

Lift the inner panel assembly into place and

be sure the rollers are in the track. Slide the

panel to one (1) wall. It easiest to set the

glass near the middle of the header.

The glass is not secure yet. Do not leave

unattended. Moving it may cause glass to

fall.

Step 26

Lift the outer panel assembly into place.

Set the rollers in their grooves on the top

of the header. Make sure the glass is

inside the lip on the track.