Installation Sheet

PAGE 11
Centerline visible in pre-drilled
holes of Wall Jamb
Step 2
Place a wall jamb on each wall. Align the wall jamb with the marked centerline running through the
pre-drilled holes.
Use a level to confirm the wall jamb is plumb. Mark the hole locations.
If custom size door, make sure the correct end of the wall jamb is towards the top. The correct
topside will have the hole 4-7/16” from the edge.
PRO-TIP: The top of the wall jambs come with round edges. Depending how your wall and
threshold meet, you may be required to modify the wall jamb to fit.