Installation Sheet
QCI-5307 Rev 0 Page 11 Cered 01/05/17
11 Place 1 stopper on each end of the Header Assembly.
Lightly secure each stopper about 5” from each end. Final ad-
justment will be required later.
Slide the Header Mount Bracket on the wall side, leaving
space at the end of the header.
12 Install the Header Assembly onto the Fixed Panel.
Install each Panel Mount Cap and plastic washer in the holes of the Fixed Panel Glass.
13 Slide the Header Mount Bracket to the wall.
Thread the Header Mount Bracket over the Insert. Thread tightly to the wall.
DO NOT TIGHTEN THE SET SCREWS YET.
DO NOT TIGHTEN SCREWS