Specification Sheet

©2020 PL Sourcing, Inc. 1020 2230576
WARRANTY:
• Limited Lifetime Mechanical Warranty
• Limited 5-Year Finish Warranty
FEATURES & OPTIONS:
Door Thickness – Fit 1-3/8" to 1-3/4" standard door thickness
Door Preparation – Cross bore: 2-1/8", edge: 1"
Latch Backset – Adjustable 2-3/8" – 2-3/4"
Latch – 2-way radius
Faceplate – 1" x 2-1/4" round corner
Spindle Type – Square
Bolt – 1/2" throw
Trim Guard – Installed
Cylinder – Zinc cylinder KW1 keyway 5 brass pins
Keys – 2 brass keys, nickel plated, stamped with key code
Strike Plate – 2-1/4" x 1-3/4" round corner
Handing – Non-handed reversible
Material – Zinc alloy
Rosette – Die cast
ANSI/BHMA – Meets the requirements of A156.2 grade 3
FUNCTIONS:
Entry – (F109)
Both levers locked or unlocked by key outside or turn-piece inside
Privacy – (F76B)
Bedroom or Bath Lock. Latchbolt operated by lever from either side
except when outside lever is locked by locking device inside. Locking
device shall automatically release when inside lever is operated or be
in unlocked position before inside lever is operated. Emergency release
on outside shall permit outside lever to operate latchbolt
Passage – (F75)
Latchbolt operated by lever from either side at all times
Dummy
Pull one/both side, no mechanical operation
Square Die Cast Rosette
Available
Finishes:
Entry
Dummy
HLK22 SERIES
DESIGNER FLAT BAR LEVER
Privacy
ADA Compliant
HLK22_Spec.pdf Page 1 of 1
US15
Satin Nickel
US10B
Oil Rubbed Bronze
US26
Polished Chrome
Matte Black
Satin Brass
Champagne Brass

Summary of content (1 pages)