Specification Sheet

WARRANTY:

• Limited Lifetime Mechanical Warranty

• Limited 5-Year Finish Warranty

FEATURES & OPTIONS:

• Door Thickness – Fit 1-3/8" to 1-3/4" standard door thickness

• Door Preparation – Cross bore: 2-1/8", edge: 1"

• Trim Guard – No

• Latch Backset – 2-3/8" or 2-3/4"

• Faceplate – 1" x 2-1/4" radius corner

• Spindle Type – Square

• Bolt – 1/2" throw

• Cylinder – Zinc cylinder KW1 keyway 5 brass pins

• Keys – 2 brass keys, nickel plated, stamped with key code

• Strike Plate – 2-1/4" x 1-3/4" radius corner

• Handing – Reversible non-handed

• Material – Zinc alloy, steel, brass

• Rosette – Stamped steel

• ANSI/BHMA – A156.2 grade 3 certiﬁed

FUNCTIONS:

• Entry – (F109)

Both levers locked or unlocked by key outside or turn-piece inside

• Privacy – (F76)

Both levers locked or unlocked by turn-piece inside. Outside lever

unlocked by coin or screwdriver

• Passage – (F75)

Latchbolt operated by lever from either side at all times

• Dummy

Pull one/both side, no mechanical operation

Available

Finishes:

HLK13 SERIES

FLAT BAR LEVER

US15

Satin Nickel

US26

Polished Chrome

Matte Black

Entry

Dummy

HLK13_Spec.pdf Page 1 of 1

PAGE 1
HLK13 SERIES FLAT BAR LEVER Available Finishes: US15 Satin Nickel US26 Polished Chrome FEATURES & OPTIONS: • • • • • • • • • • • • • • Matte Black Entry Door Thickness – Fit 1-3/8" to 1-3/4" standard door thickness Door Preparation – Cross bore: 2-1/8", edge: 1" Trim Guard – No Latch Backset – 2-3/8" or 2-3/4" Faceplate – 1" x 2-1/4" radius corner Spindle Type – Square Bolt – 1/2" throw Cylinder – Zinc cylinder KW1 keyway 5 brass pins Keys – 2 brass keys, nickel plated, stamped with key code Strike P