Handle Set Installation Sheet

OR
INSTALLING THE STRIKE PLATE
NOTE: If required, bend the adjustable tang on the strike to
NOTE: Ensure the lip
faces away from the door.
OR
Security Pin
Ø 2-1/8” (54 mm)
2-3/4” (70 mm)
2-3/8” (60 mm)
5
2-3/8”(60mm)
2-3/4”(70mm)
A. Attach the correct faceplate
B. Set the latch backset
C. Install the latch
INSTALLING THE LATCH
NOTE: The bevel should face the door jamb.
TEMPLATE
NOTE: Double check your product for the correct hole
sizes.
Fold here.
Place on the door edge.
Backset
Backset
Installation
CAUTION: Be sure the latch cam is upright before
making any backset adjustment.
Right
Wrong
1-3/4”
(45 mm)
2”
(51 mm)
1-3/8”
(35 mm)
1-9/16”
(40 mm)
Drill a 1” (25 mm) diameter
hole at the center of the door
edge.
OROR
OR
X
b.a.
OR
Exterior
Interior
A.
OR
Remove the interior rose and lever
For Concealed Screws (Leverset Only)
For Exposed Screws
B.
OR
INSTALLING THE LEVER/KNOB
SWITCHING THE HANDLES (IF DESIRED)
NOTE: Levers installed in reverse will not affect the product’s performance.
OR
90ņ
90ņ
90ņ