Installation Sheet

2
Installing the Rail
All Rail Mounts must be screwed into a solid Wood Header
HBD5030X96_INSTRUCTIONS Customer Service 1-800-221-3379
Installing the Rail
16" 16" 16" 16"
1.7inch
2"
7/32"
16"
Note: Stops may end up inside end
mounts depending on your hanger
placement,If so place stops
on rail before mounting rail.
13MM
Hanger Mounting Instructions
Anti-Jump Disks Mounting Instructions
5
Hanger position from the edge can vary
based on your door design.
Position Shown is for a flat Surface Door
you may have to Adjust to center Hanger
onto the vertical styles of your door
STILES
Anti Jump Disks keep your door from
accidently coming off the Rail.
They are installed offset with the Screw
outside the rail in case you need to remove
the door later.
Once your installation is complete rotate
the Disks under the rail and tighten down.
2 3
4
3.5
"
3.7
"
1.2 "
5/32 "