Installation Sheet

Barn Door Hardware Installation
For Use with 120 " Straight Strap Standard Wheel Hanger Kits
7/32"
1/4"
3/8"
The tools below are NOT included in the package and are needed for installation.
1
1.7inch
3/8"
(4.8”for reference)
Parts Included:
DH = Door Height
Recommend that you layout
your door and hardware on the
floor first to determine spacing.
Measure twice Mount once
Rail must be level to keep door
from moving by itself!
HBD5020X120_INSTRUCTIONS Customer Service 1-800-221-3379
M10 Cap Nut（x4）
Mortise Door Guide(x1)
ST4.2x25mm(x2)
Ø6 Anchors (x2)
Non-Mortise Door Guide(x2)
ST4.2x25mm(x4)
Ø6 Anchors (x4)
Anti Jump Disk(x2)
13MM 17MM
120”
16” 16” 16”16”16” 16”
6” 6”
Rail 60” Long (x2) Rail Wall Spacer（x9） Lag Bolt M8 x 90MM (x9) M8 Washer（x9）
Door Stop(x2)
M10 x55MM Bolt For 1-3/8” Doors (x4)
M10 x60MM Bolt For 1-3/4” Doors (x4)
Door Hanger(x2)
M10 Washer（x8）
Rail Mounting Instructions,Locating the Mounting Position
1
Allen Wrench M2（x1）