Barn Door Hardware Installation For Use with 60"Bent Strap Standard Wheel Hanger Kits Parts Included: Rail 60" Long (x1) Rail Wall Spacer (x4) Lag Bolt M8 x 90MM (x4) M8 Washer (x4) Door Stop's) Anti Jump Disk) Allen Wrench M2 (x1) M10 x55MM Bolt For Doors (x4) M10 Washer (x8) M10 x60MM Bolt For Doors (x4) M10 Cap Nut (x4) Mortise Door Guided) Non-Mortise Door Guided) Q 6 Anchors (x2) 16 Anchors (x4) lL — Door Hanger) The tools below are NOT included in the package and are needed for installation.
Determined in the field DH + cinch 2 Installing the Rail ] [SER EGRET 8 | Note: Stops may end up inside end mounts depending on your hangs placement, If so place stops pi mounting rail. A All Rail Mounts must be screwed into a solid Wood Header y 1 Hanger Mounting Instructions a3) DRILL OUT 1 Crm——— HBD5000X60_INSTRUCTIONS Hanger position from the edge can vary based on your door design.
Bottom Guide Mounting Instructions HBDS5000X60_INSTRUCTIONS The Guide Stabilizes the door by keeping the bottom from Swinging. Kit includes both a Mortise (Grove in the bottom of the door) and a Non-Mortise option.
1°) TART Door should Slide smoothly in both Directions I | Optional Accessories Soft Close Adapter Kit Each kit Contains a left and right Soft Closer that mounts behind the Rail and keeps children from slamming doors.
