Installation Guide
For additional assistance or service please contact:
LORDEAR
®
lordear.guo@gmail.com
www.lordear.com
303-397-6818
INSTRUCTIONS FOR MODELSINSTRUCTIONS FOR MODELS
INSTRUCTIONS FOR MODELS
Need Help?
TOOLS AND SUPPLIES
Adjustable
Wrench
Slip Joint
Wrench
Slip Joint
Wrench
Slip Joint
Wrench
Phillips
Screwdriver
Aerator
Wrench
(included)
Hex Key
Wrench
(included)
Level
HELPFUL TOOLS & SUPPLIES:
Thread Seal
Tape
Safety
Glasses
Plumber’s
Putty
Thread Seal
Tape
Safety
Glasses
Plumber’s
Putty
Thread Seal
Tape
Safety
Glasses
Plumber’s
Putty
Limited Lifetime Warranty
WARRANTY
Your new Lordear Product is designed for years of trouble-
free performance. Keep it looking new by cleaning it
periodically with a soft cloth. The use of harsh chemicals
and abrasives on any of the Lordear custom finish
products may damage the finish and void the product
warranty. Please be sure to only use approved cleaners.
Please contact Lordear for any clarification of acceptable
cleaners.
MAINTENANCE
Cover your drain to prevent loss of parts. Be sure to
wear eye protection while cutting pipe.
SAFETY TIPS
IMPORTANT
• Be sure to read instructions thoroughly before
beginning installation.
• Do not over-tighten any connections or damage
may occur.
• This faucet has an operating range of 20-80 psi.
1
Remove Inlet Hose Assembly (1), Mounting
Nut (2), Metal Washer (3), and Rubber
Washer (4) from Spout.
Remove Mounting Nut (1), Metal Washer (2),
and Rubber Washer (3) from Cold Endbody
Assembly. Repeat process for Hot Endbody
Assembly
2
3/10 4/10