I NSTALLATI ONMANUAL
Before Installation: When you open the product packaging, please check the product and accessories at first. If there is any discrepancy, please contact the company or our distributor immediately. Item No. 1 2 3 4 5 6 Packing List Product Name QTY Faucet handle lever Hose Drain Secure Nuts Accessories 1 Pcs 2 Pcs 3 Pcs 1 Pcs 3 Set 1 Bag 8"+ - * Drawing maybe a little different for the item you have.
INSTRUCTIONS FOR MODELS TOOLS AND SUPPLIES Slip Joint Wrench Adjustable Wrench Phillips Screwdriver 1 Remove Inlet Hose Assembly (1), Mounting Nut (2), Metal Washer (3), and Rubber Washer (4) from Spout. 2 Remove Mounting Nut (1), Metal Washer (2), and Rubber Washer (3) from Cold Endbody Assembly.
3 The “COLD” and “HOT” Endbody Assemblies are clearly marked. Place COLD Endbody Assembly through the appropriate hole in the counter top. Align Endbody Assembly so the Rubber Access Plug (1) is facing the rear. Repeat process for the HOT Endbody Assembly. 5 Place Spout Assembly through the center hole of counter top. From below, reinstall the Spout Rubber Washer (1), Metal Washer (2), and Mounting Nut (3). Loosely assemble at this time.
6 From above, align Spout and Handle bases so that they are aligned horizontally. 7 While maintaining the proper alignment, Wrench Tighten Spout Mounting Nut (1). Then snug Endbody Mounting Nuts (2). Final tightening of Endbody mounting is accomplished by Tightening the Mounting Screws (3) while using a Phillips Screwdriver. Wrench tighten Spout Inlet Hose (4). 7/10 8 From below, install the Endbody Outlet Hoses (1) (shorter hose) to the Inlet Tee of the Spout (2). Wrench Tighten.
9 Make connections to water supplies. The inlet threads of the faucet are 9/16”-24 UNEF and will accept a 3/8” Compression Fitting. Wrench Tighten. Accepts a 3/8” Compression Fitting SUPPLY STOPS NOT INCLUDED 10 Turn on water supplies and flush both COLD and HOT cartridges for one minute, while checking for leaks. Return Handles to closed position when complete. Guarantee Repairs Claims 1. Within warranty period, LORDEAR is responsible for repairing any defective product for free. 2.
