Installation Guide

Clean and maintain product
1.How to clean the shower head :
A.Rub the nozzles with fingers or toothbrush to loosen deposits,then run
hot water for a while .
B.Put the shower head in a pot,fill with enough white vinegar or Detergent
to cover the shower head.Then soak it for 30 minutes or longer.
C.Use a high quality microfiber cloth and gently wipe over the surface,
then rinse with warm water.Finally,use a dry chamois or paper towel to
gently remove any residue.
13
Warm Tips :
If you feel the flow is too small , you can take out the water
restrictor accordingly.
Before After
water restrictor