Instructions / Assembly

Table Of Contents

Assembly Instructions

TIPS

1.Insert the screwsin holes

andtighten the screws. but not too tight, 50% is ok, finally tighten allthescrews.Ifsome

issues happened that some screws can not target to the hole or some parts are difficult

to install. please adjust the tightness of the screws.

2. 2 people are recommended to finish

PAGE 1
Assembly Instructions TIPS 1.Insert the screwsin holes andtighten the screws. but not too tight, 50% is ok, finally tighten allthescrews.Ifsome issues happened that some screws can not target to the hole or some parts are difficult to install. please adjust the tightness of the screws. 2.
PAGE 2
A B C x1 D x1 E F x1 G x1 x1 H x1 K J x1 L x1 x2 #2 #1 M6* 35 #6 x1 M6 x18 x1 #4 #3 M6* 55 x5 x1 #5 M6 x1 8 x 41 x1
PAGE 3
NOTE:50% TIGHTEN BEFORE FIXING ALL BOLTS 01 F D ＃3＊4 C ＃4＊8 ＃2＊4 02 E ＃3＊6 ＃2＊6 ＃4＊12
PAGE 4
NOTE:50% TIGHTEN BEFORE FIXING ALL BOLT S 03 A B ＃3＊2 ＃4＊4 ＃１＊2 04 C ＃4＊5 ＃1＊5
PAGE 5
NOTE:50% TIGHTEN BEFORE FIXING ALL BOLTS G 05 ＃3＊6 ＃4＊12 ＃2＊6 06 J H H K