DESCRIPTION + Brass construction » Flexible supply lines with 3/8" or 9/16” compression fittings s Includes Red/Blue indicators FLOW » Water usage is limited to these maximum flow rates as indicated by the corresponding product markings » North America: 1.5 gpm max at psi « Californian 1.
Single-Handle Lavatory Faucet Installation INSTALLATION MANUAL Tools You Will Need | mit i wens 7 Mistakable wrench Hexagon reverend Notes before installation; 1: Please: check that ial components: are present. 2.Before Installation ensure that all Teed: lines are dear of debris and univalve is present. Ensure water pressure 1s between 0-125 PSI (includes combination of hot and cold feed lines). 4.
1-1 Installation Sketch With Overflow without Overflow 4 Drainpipe Bil Eon: Gasket Sponge Gasket zeolite: Gasket Praia Body ert Log 7: Silicon Gasket Plastic Rasher Brass Locking Nut 4 Horrible Goatskin 13 Locking Nit 1-2 Installation Steps Vessel Sink/Drain Installation{Overflow) Installation as shown in the figure Vessel Sink/Drain Installation (non-Overflight) Installation as shown in the figure
