Made in China
PARTS LIST A B C x1 Seat x1 Left front leg x1 Right front leg D E F x1 Front cross bar x1 Back x1 Left arm G x1 Right arm HARDWARE LIST 1.
HELPFUL HINTS · Tools needed, but not included: · Separating parts before starting ! How to install barrel nuts Important: Press a barrel nut (4) into the hole in the part, making sure the “-“ pattern is facing up. 4 ! Important: Using a standard screw driver, turn the nut until the “-“ is straight and the treaded hole is facing outwards to accept the screw.
STEP 1 Attaching left front leg(B) and right front leg (C) to seat with 6 x part (1) and 6 x part (2) and 6 x part (3) and wrench (6) 3 2 1 M6*45mm x6 M6 x6 6 M6*12mm x6 x1 x6 2 6 3 C 1 A 1 1 B Assembled View:
STEP 2 5 Attaching front cross bar (D) to legs with 4 x part (5) Ø4*35mm x4 C D 5 B 5 Assembled View:
STEP 3 4 Put 4 x part (4) into the hole of back ( E), Make Sure the “-”is aligned up the hole M6 x4 4 x4 4 4 4 E Assembled View:
STEP 4 Attaching chair back (E) to seat (A) with 2 x part (7) 7 M6*50mm x2 E 7 A 7 Assembled View:
STEP 5 3 2 1 Attaching left arm (F) and right arm (G) to chair back and legs with 2 x part (1) and 2 x part (2) and 2 x part (3) and wrench (6) and 2 x part (7) M6*45mm M6 x2 6 M6*12mm x2 x2 x1 7 E M6*50mm 7 x2 3 2 F 1 7 G B C Assembled View: x2 2 6 3
