Instructions / Assembly

HANGING & INSTALLATION INSTRUCTIONS
RECOMMENDED TOOLS (Not Included)
DRILL TAPE MEASURE
SCREWSANCHORS
Mark wall anchor locations; make sure
the marks are level and spaced apart
as required
Drill holes, 3/16” diameter through
drywall
Tap the drywall anchors firmly into
drilled opening
Carefully drive the drivewall screws
into the anchors, leaving the screw
heading protruding from the surface as
required
Please ensure the mirror is installed safely. If you’re
not certain the mirror is safely hung, consult with a
contractor.
Hang your Mirror and enjoy our craft in
your space
HAMMER LEVEL PENCIL
HARDWARE (Not Included)
MOUNT TO DRYWALL AS FOLLOWS
1 2
3 4
5