Users Manual

-7-
DOC015145EN-A
BLE 3000 Module User's Guide
2.4 Historical Data Function
Measurements and events of the BLE 3000 module are automatically stored in the DMC 3000 histogram.
2.5 Handling Recommendations
Do no use the dosimeter belt clip when the BLE 3000 module is attached as the opening gap of the clip is
significantly reduced.
The user must always wear the dosimeter against the body (see the label on the back of the module).
Avoid having any foreign content, such as dust, dirt, or labeling between the 26-pin connector board and the BLE
3000 module (no sticker, no dust, no stain, etc.).
Make sure the gasket is clean and in good condition.
For proper sealing, equal and proper torque should be applied on the two screws (see §4.2).
General