Users Manual

-6-
DOC015145EN-A
BLE 3000 Module User's Guide
2.2 Settings
The BLE 3000 module contains all the proper functional settings parameters.
These parameters are saved in the module on non-volatile memory.
2.3 Bluetooth Functions
2.3.1 Transmission
When the dosimeter switches to measurement mode, the BLE 3000 module automatically switches to transmission
mode. The BLE 3000 module then periodically transmits the dosimetric data, the normal transmission rate can be
set between 2 and 255 seconds.
If the dosimeter is in default or in alarm, the transmission frequency
is increased.
It helps to get a more frequent update of info in case of danger (the
minimum transmission interval is of two seconds).
2.3.2 Bluetooth function setup
The Bluetooth function of the BLE 3000 module can be set using
DMCUser.
The following items can be set:
 the transmission intervals (normal)
 the setup of the data to be transmitted.
For more details about module setup in DMCUser, please refer to
the DMCUser Instruction Manual.
General
Module setup in DMCUser