Users Manual

-12-
DOC015145EN-A
BLE 3000 Module User's Guide
Module Attachment
Note:
Due to the presence of voltage on the pins of the 26-pin connector, remove or add new modules when the dosimeter
is in Pause mode. Avoid shorting the pins.
4.3 Detaching the BLE 3000 module
 Make sure the DMC 3000 is in Pause mode.
 Unscrew the two screws (8) with the screwdriver provided with your DMC 3000 (1).
 Pivot the module and detach it from the dosimeter (9).
 Conduct a software disconnect using the "Detach Module" command of DMCUser software (10), or
temporarily remove the dosimeter’s battery (11).
 Replace the battery if necessary.
(9)
(10)
(11)
(8)