Users Manual

-11-

DOC015145EN-A

BLE 3000 Module User's Guide

4.2 Attaching the BLE 3000 module

 Carefully insert 26-pin connector, ensuring side labeled “BATTERY SIDE” is inserted closest to the battery (5).

 Check the cleanliness of the module gasket.

 Engage the module bottom side ﬁrst, with the gasket placed inside the bottom of the DMC 3000.

 Rotate the module (7).

 Hand tighten the two module screws with the provided screwdriver (1) at 0.25 to 0.35 Nm (8).

 Ensure the icon is displayed. If it does not, verify the dosimeter is conﬁgured to accept the module (see

§2.2.3 and §2.7).

Module Attachment

Note:

Due to the presence of voltage on the pins of the 26-pin connector, remove or add new modules when the dosimeter

is in Pause mode. Avoid shorting the pins.

(5)

(6)

(8)

(7)