User's Manual

APPENDIX
12
APPENDIX A: AGENCY CERTIFICATIONS FOR S3B HARDWARE
FCC (United States) Certification / ISED Certification
The XBee-PRO® 900HP/XBee-PRO® XSC RF Module complies with Part 15 of the FCC
rules and regulations. Compliance with the labeling requirements, FCC notices and antenna
usage guidelines is required.
In order to operate under 's FCC Certification, RF Modules/integrators must comply with the
following regulations:
1. The system integrator must ensure that the text provided with this device [Figure A-01] is
placed on the outside of the final product and within the final product operation manual.
2. The XBee-PRO® 900HP/XBee-PRO® XSC RF Module may only be used with antennas
that have been tested and approved for use with this module.
Labeling Requirements
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Host labeling requirement: Contains transmitter module:
FCC ID: 2AHI8-XB900HP
IC: 26167-XB900HP
FCC Notices
IMPORTANT: The XBee-PRO® 900HP/XBee-PRO® XSC OEM RF Module has been
certified by the FCC for use with other products without any further certification (as per FCC
section 2.1091). Modifications not expressly approved by could void the user's authority to
operate the equipment.
IMPORTANT: This modular transmitter is only FCC authorized for the specific rule parts (i.e.,
FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible
for compliance to any other FCC rules that apply to the host not covered by the modular
transmitter grant of certification.
IMPORTANT: OEMs must test final product to comply with unintentional radiators before
declaring compliance of their final product to Part 15 Subpart B of the FCC Rules.
IMPORTANT: The RF module has been certified for portable applications.