Owner's manual

MEASUREMENT
Background Measurement
•Automatic background substraction
•Background updated every second
for each detector
•Measurement algorithm using two median lters
to follow any background change in real time
•Quickly uctuating background does not lead
to measurement abort
•After background change automatic return
to status «ready»
Measurement
•Automatic calculation of shortest possible
measurement time
•P² accelerator to shorten measurement time for
non-contaminated personnel by up to 30 %
•Using preset xed measurement time possible
•Positioning by voice prompts
Results
•Results announced by voice prompts
•Graphic display helps to identify the contaminated
parts of the body
•Individual results of all detectors available via push
button
•Measurement results are stored in a database and
can be exported
•Full intranet access to database using CeMoSys™
(option)
SERVICE
Maintenance
•Standardised components for quick & easy service
•All parameters and maintenance tools available via
graphic user interface
•Information on current detector and measurement
status availbale
•Check of all binary inputs and outputs
•Light leak test to identify damaged detectors
•Quick test for single detectors with calibration sources
(option)
•Detector replacement in less than 60 sec due to
hardware simplication and «ready» in 7 min (required
for reestablishing background)
Self Diagnostic
•Background count rate with minimum and maximum
alarm thresholds, special algorithm to early identify
light leakage
•Monitoring of communication between electronics
and PC, reporting error information
Calibration Tool
•Single and multiple source calibration
•Calibration of one, several or all channels
• Simple recalibration after detector change
•Database for calibration sources, automatic
calculation of current activity
•Reference calibrations automatically transferred
to measurement software
•Comparision of detector efciencies with reference
database for monitoring calibration results possible
•Results can be printed and exported to USB device