User Manual

CAMERA HEAD
Diameter 40.5mm (1.6”)
Length w/o lens 339mm (13.4”)
Weight 1.4kg (2.8lb) without head
or lens body
339mm
(13.4”)
40.5mm (1.6”)
ELECTRICAL
(EXCLUDING VIEWING HEADS OR LENS BODIES)
Max power 3 watts
Mechanical Stainless Steel,
non-browning optics
Optics 25mm non-browning f/2.5 lens or
9mm non-browning f/2.0 lens
Typical viewing angles in air for 25mm f/2.5 lens:
Horizontal 26°
Vertical 20°
Diagonal 32°
Typical viewing angles in air for 9mm f/2.0 lens:
Horizontal 63°
Vertical 50°
Diagonal 75°
Resolution 475tvl RGB
CABLE
RC710CAB03A 100m max (328 ft)
ENVIRONMENTAL
Operating temperature sensor 0 to 50°C
Storage temperature -25 to 60°C
Humidity (non-condensing) 95%
(The RC710 Camera is fully waterproof when tted with an appropriate
viewing head or lens body.)
Radiation tolerance exceeding 30 kGy (3Mrads) total dose
Signal to noise ratio
(CCIR weighted)
>45dB (CCU standard gain)
CAMERA CONTROL UNIT
CCU DIMENSIONS
Length 380mm (15”)
Width 484mm (19”)
Height 133mm (5.2”)
Weight 8.3kg (18.3lb)
ENVIRONMENTAL
Operating Temperature 0 to 40°C (32° to 104°F)
Storage Temperature -25° to 60°C (-13° to 140°F)
Humidity 95% non-condensing
Case Material Aluminum
Inputs AC power and RGB
Line Standards 525
Supplies 110/120V or 220/240V or 50/60Hz