Manual
315 Daniel Zenker Drive
200 IST Center
Horseheads, NY 14845
USA
T +1.607.562.4369
+1.800.432.1478
F +1.607.562.4392
Station Road
Alton, Hampshire
GU34 2PZ, UK
T 01420.541600
F 01420.541700
Kaiser-Konrad-Str 93a
D 53225 Bonn
Deutschland
T 0228.625088
F 0228.626300
7.87”
(200mm)
7.87”
(200mm)
SPECIFICATIONS AND PERFORMANCE
PYROMETER SENSOR
Temperature Range 800°–2500° F (427°–1371°C)
Temperature Accuracy 1.0% Full scale
Measurement Technique Single wavelength pyrometry
Spectral Regions Narrow band centered at
1.6 microns
Spot Size 1/24 of the horizontal width
of the image
Spatial Scan Resolution 47 horizontal x 35 vertical width of the image
Scan Rate Scan speed varies with size & number of
TMZs or via operator adjustment
CAMERA
Power 115-230 VAC, 50/60 Hz
Camera Detector Solid state color image sensor
System Resolution 300 lines minimum throughout the image
Video 1.0V p-p, 75ohm, CCTV signal
/VTN: NTSC or /VTP: PAL video timing
selected at time of order
Control Iris adjustment on rear of camera; remote
iris adjustment from the processor
Application Filter Filters are provided to match your process
and maximize performance. Contact your
Sales Representative
ENCLOSURE
Construction /CEI: Corrosion-resistant, insulated, air-
cooled, NEMA 4; /CEW: Corrosion-resistant,
water-cooled, NEMA 4
Cooling Type Vortex cabinet cooler, 25 SCFM @ 100 psi
(13 dm3/sec @ 690 kPa); instrument-quality
air required or water cooled option available
Ambient Environment Max. 140°F (60°C) with negligible radiant heat
load. Water cooled option available to handle
high radiant heat environment
MECHANICAL
Video Output Jack Female PL-259 “UHF” type
Power Input Jack Removable waterproof miniplug (JOY type
TP, female 3-conductor; mating power
cord provided)
Enclosure Cooling Input 1/4” brass quick-disconnect nipple; mating
coupler (Snaptite BVHC4-4F) provided
Lens Cooling Input 1/2” brass quick-disconnect nipple; mating
coupler (Snaptite BVHC8-8F) provided
Weight 30 pounds (14kg) for standard air-cooled
conguration (lens and camera)
LENS
Construction Air or water-cooled 304 stainless steel
outer shroud. Sapphire window for max.
environmental protection
Type 45° offset lens
Length (L) /OAL30W553
27.7” (694mm)
For details on our full range of
Spyrometer lenses, please contact your
sales representative.
Field of View Wide - 75° H x 58° V;
Medium - 50° H x 38° V;
Narrow - 35° H x 26° V
Diameter /L: 1.5” (38mm); /OAL: 2.0” (51mm);
/WCL: 2.5” (63mm)
Cooling Requirements Instrument quality air, 25– 40 SCFM
(12–19 dm3/sec) @ 5–15 psig
(34–103kPa) required for straight view lens
Thermocouple /TJ: Type J thermocouple option;
/TK: Type K thermocouple option
© Copyright 2008. All rights reserved for trademark and registered trademark
information.
The above specications may vary according to system conguration.
Mirion Technologies Incorporated reserves the right to amend or change the
information on this sheet without prior warning.
12/08