Instruction Manual
315 Daniel Zenker Drive
200 IST Center
Horseheads, NY 14845
USA
T +1.607.562.4369
+1.800.432.1478
F +1.607.562.4392
12954 Stonecreek Drive
Pickerington, OH 43147
USA
T +1.614.367.2050
F +614.367.2464
Station Road
Alton, Hampshire
GU34 2PZ, UK
T +44.(0).1420.541.600
F +44.(0).1420.541.700
Kaiser-Konrad-Str 93a
D 53225 Bonn
Deutschland
T +49.(0).228.625.088
F +49 (0) 228.626.300
www.mirion.com
© Copyright 2009. All rights reserved for trademark and registered trademark
information.
Quadtek® is a registered trademark of Mirion Technologies Corporation.
The above specications may vary according to system conguration.
Mirion Technologies Incorporated reserves the right to amend or change the
information on this sheet without prior warning.
02/09
?F
+
+
+
+
40
+
200
120
160
80
0
+
IN THE UK
PSHIRE
38
203
577
'L' - ACCORDING
TO LENS TYPE
261
203
293
IST-MODEL No
STD
ERIAL No
SPECIFICATIONS AND PERFORMANCE
CAMERA
Power Requirements 85-265 VAC, 47-440 Hz
Camera Sensor
1
/
2
” solid state image sensor
Sensor Resolution
>500 lines
Video
1.0 V P-P, 75 ohm, CCTV signal
/VTE: EIA RS170 525 lines or
/VTC: CCIR 625 lines
Control
/AIR: Remote iris adjustment (with M721 Re-
mote Auto Iris Controller)
LENS
Construction
Air or water cooled 304 stainless steel outer
shroud. Sapphire window for maximum environ-
mental protection.
Lens Options
/L: Straight view, /RAL: right angle with 90° off-
set optics, /OAL: oblique angle with 45° offset
optics, /WCL: water cooled
Lengths STD /L30: L=704mm (27.7”) or
/OAL30: L=678mm (26.7”)
Other lenses available. Please contact your
sales representative.
Field of View Wide: 75°H x 56°V
Medium: 55°H x 42°V
Narrow: 35°H x 26°V
Diameter /L: 38mm (1.5”)
/RAL & /OAL: 51mm (2.0”)
/WCL: 57mm (2.25”)
Cooling Requrements Instrument quality air, 12-19 dm
3
/sec (25-40
SCFM) @ 34 - 103 kPa (5-15 psig required
for straight view lens (to ISO 8573-1, Class
1• 7• 2)
Environment 1621°C (2950°F) with proper cooling
Thermocouple /TJ: Type J thermocouple option
/TK: Type K thermocouple option
ENCLOSURE
Construction /CEI: Corrosion-resistant, insulated, air-
cooled, NEMA 4;
/CEW: Corrosion-resistant, water-cooled,
NEMA 4
Cooling Type /CCV: Vortex cooling 13 dm
3
/sec @ 690 kPa
(25 SCFM @ 100 PSI); Instrument quality air
required.
Ambient Environment Max. 60°C (140°F) with negligible radiant
heat load. Water cooled option available to
handle high radiant heat environment
MECHANICAL
Video Output Jack Female PL-259 “UHF” type
Power Input Jack Removable waterproof miniplug (JOY type
TP, female 3-conductor; mating power cord
provided)
Enclosure Cooling
Input
1
/
4
” brass quick-disconnect nipple; mating
coupler (Snaptite BVHC4-4F) provided
Lens Cooling Input
1
/
2
” brass quick-disconnect nipple; mating
coupler (Snaptite BVHC8-8F) provided
Weight 30 pounds (14kg) for air-cooled congura-
tion (lens and camera)