Owner's manual
imaging systems
A Mirion Technologies Division
Featuring:
IST-QUADTEK
®
M408 AIR FILTER
Two-Stage Air Filter
The IST-Quadtek video imaging systems owe much
of their long-life and reliability to the use of cooling
purge air which serves to cool and clean the camera
enclosure and lens. A constant supply of clean air is
essential for proper camera operation and protection.
The supply air used for this purpose is a potential
source of dirt, oil, water, and chemical contaminates
and requires ltering before use. The M408 Two-
Stage Air Filter helps to provide clean air in industrial
environments. The M408 is used in applications
where there is a higher air contaminate content level
and where local control and regulation of the air
supply to the camera is required.
FEATURES
• A three-micron lter removes solids and bulk liquids
• Second 0.01 micron lter removes remaining oil vapors
and corrosive gases
• Independent gauges and regulators monitor air ow for
camera and lens
• Bypass option for easy lter replacement
• Low maintenance and no tools required
• Rugged design with low prole pressure indicators
• Additional water separator as an option