Instruction Manual

LT-6714 Rev 0 http://www.mircom.com Page 2 of 3
C. Connect the Power Cable
Note: Read the manufacturer’s documentation included with the
uninterruptible power supply.
1. Connect the power supply cable from the Line terminals on the TX3-PS24-5A power
supply to one of the Battery Backup + Surge Protection receptacles on the
uninterruptible power supply.
2. Follow the manufacturer’s documentation to power on the uninterruptible power supply.
3. Go to page 3.
Back-UPS
Battery Backup + Surge Protection
TX3-PS24-5A
power supply
Power supply cable (included
with TX3-PS24-5A
Line
To AC outlet (follow
manufacturer's
instructions)