Phau Ntawv Qhia
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- 1.0 Introduction
- 2.0 Mechanical Installation
- 2.1 Mounting Dimensions
- Table 3 BB-1001 Backbox Dimensions
- Table 4 BB-1002 Backbox Dimensions
- Table 5 BB-1003 Backbox Dimensions
- Table 6 BB-1008 Backbox Dimensions
- Table 7 BB-1012 Backbox Dimensions
- How to mount the BB-1000 Series enclosures directly to the wall
- 1. Open the front door.
- 2. Mount the backbox to the wall using the four screws provided.
- 1. Place the RAX-LCD-LITE into the backbox, ensure that the mounting holes on the annunciator line up with the studs in the backbox.
- 2. Place the Annunciator Cover Bracket over the RAX-LCD-LITE and use the nuts provided with the backbox to secure the assembly. Refer to the figure below.
- 2.1 Mounting Dimensions
- 3.0 Wiring Instructions
- 4.0 DIP Switch Settings
- 5.0 Specifications and Features
- 6.0 Warranty & Warning Information
7
Introduction
1.1 Contact Us
For General Inquiries, Customer Service and Technical Support you can contact us Monday to
Friday 8:00 A.M. to 5:00 P.M. E.S.T.
1.1.1 General Inquiries
Toll Free 1-888-660-4655 (North America Only)
Local 905-660-4655
Email mail@mircomgroup.com
1.1.2 Customer Service
Toll Free 1-888-MIRCOM5 (North America Only)
Local 905-695-3535
Toll Free Fax 1-888-660-4113 (North America Only)
Local Fax 905-660-4113
Email salessupport@mircomgroup.com
1.1.3 Technical Support
Toll Free 1-888-MIRCOM5 (North America Only)
888-647-2665
International 905-647-2665
Email techsupport@mircomgroup.com
1.1.4 Website
www.mircomgroup.com
firealarmresources.com