Phau Ntawv Qhia
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- 1.0 Introduction
- 2.0 Mechanical Installation
- 2.1 Mounting Dimensions
- Table 3 BB-1001 Backbox Dimensions
- Table 4 BB-1002 Backbox Dimensions
- Table 5 BB-1003 Backbox Dimensions
- Table 6 BB-1008 Backbox Dimensions
- Table 7 BB-1012 Backbox Dimensions
- How to mount the BB-1000 Series enclosures directly to the wall
- 1. Open the front door.
- 2. Mount the backbox to the wall using the four screws provided.
- 1. Place the RAX-LCD-LITE into the backbox, ensure that the mounting holes on the annunciator line up with the studs in the backbox.
- 2. Place the Annunciator Cover Bracket over the RAX-LCD-LITE and use the nuts provided with the backbox to secure the assembly. Refer to the figure below.
- 2.1 Mounting Dimensions
- 3.0 Wiring Instructions
- 4.0 DIP Switch Settings
- 5.0 Specifications and Features
- 6.0 Warranty & Warning Information
6
Introduction
1.0 Introduction
MGC's FX-3500 and MR-2350 remote shared display is the RAX-LCD-LITE. The RAX-LCD-
LITE shared display provides mimics the main Fire Alarm Panel display at a remote location. It
is equipped with a large 4 line x 20 character back-lit alphanumeric LCD display that uses a
simple menu system complete with a directional keypad and switches for Enter, Menu, Cancel
and Info. There are five types of enclosure available: the BB-1001, BB-1002, BB-1003, BB-
1008, and BB-1012 which can take 1,2,3,8,12 chassis respectively.
Table 1 Annunciator Chassis Descriptions
Annunciator
Chassis
Description
RAX-LCD-LITE Remote Annunciator
Table 2 Enclosure Chassis Capacity
Enclosures Chassis Capacity
BB-1001 1
BB-1002 2
BB-1003 3
BB-1008 8
BB-1012 12
firealarmresources.com