Phau Ntawv Qhia
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- 1.0 Introduction
- 2.0 Mechanical Installation
- 2.1 Mounting Dimensions
- Table 3 BB-1001 Backbox Dimensions
- Table 4 BB-1002 Backbox Dimensions
- Table 5 BB-1003 Backbox Dimensions
- Table 6 BB-1008 Backbox Dimensions
- Table 7 BB-1012 Backbox Dimensions
- How to mount the BB-1000 Series enclosures directly to the wall
- 1. Open the front door.
- 2. Mount the backbox to the wall using the four screws provided.
- 1. Place the RAX-LCD-LITE into the backbox, ensure that the mounting holes on the annunciator line up with the studs in the backbox.
- 2. Place the Annunciator Cover Bracket over the RAX-LCD-LITE and use the nuts provided with the backbox to secure the assembly. Refer to the figure below.
- 2.1 Mounting Dimensions
- 3.0 Wiring Instructions
- 4.0 DIP Switch Settings
- 5.0 Specifications and Features
- 6.0 Warranty & Warning Information
10
Mechanical Installation
How to mount the Annunciator Cover Bracket onto the RAX-LCD-LITE
1. Place the RAX-LCD-LITE into the backbox, ensure that the mounting holes on the
annunciator line up with the studs in the backbox.
2. Place the Annunciator Cover Bracket over the RAX-LCD-LITE and use the nuts provided
with the backbox to secure the assembly. Refer to the figure below.
Figure 2 Installing the Annunciator Cover Bracket onto the RAX-LCD-LITE
firealarmresources.com